Shipping throughout Russia and to other countries


CANTILEVER PUMPS OF THE K SERIES

Cantilever pumps of type K, 1K, 2K allow pumping fresh, industrial water and / or other liquids similar in density to water, with a temperature from -10 to +85 ° C, pH = 6 -9, with a solid content of no more than 0.1% by weight and a size of no more than 0.2 mm.

The pump body is made of cast iron of the brand SCH20 (SCH25), the impeller of the one-way inlet is also made of cast iron SCH20 (SCH25), steel shaft 35-3GP. One of the advantages of K—type cantilever units is the presence of support legs that help to maintain the pump without dismantling the pipeline during repair.

To ensure uniform rotation of the impeller, the shaft is mounted on needle bearings of a closed type. Shaft seal - stuffing box type AP-31/ KHBP-31 according to GOST 5152-84.

Thanks to the compensation chamber, possible leaks are eliminated, and the front and rear sealing elements provide reliable protection against internal and external leaks. The efficiency of these pumps is 80%, based on the type of model and the power of the electric motor.

Modifications:

K - centrifugal cantilever pumps,
1K - centrifugal cantilever pumps (LGM),
2K - centrifugal cantilever pumps upgraded with liquid lubrication of bearings (LGM).


CANTILEVER MONOBLOCK PUMPS OF THE KM SERIES

Centrifugal cantilever-monoblock pumping units of the KM type are designed for pumping industrial water (except sea water) in stationary conditions with a pH = 6-9, a temperature from 0 to +85 ° C, with a single oil seal (equipped by default), from 0 to +140 °With mechanical seal and other liquids similar to water in density, viscosity and chemical activity, containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

All pumps are made according to GOST 27.003-90 and are produced in a climatic version in accordance with GOST 15150-69 and are absolutely safe for life, human health and the environment.

Modifications:

KM - centrifugal pumps cantilever-monoblock.


DOCUMENTS

All ESQ products

The group «New Technologies» offers products from the plant ESQ: electric motors, pumps, frequency converters, industrial fans, gearboxes, variators, control stations and cabinets, modular automation, operator touch panels
  • Electric motors ESQ
    Electric motors
    series ESQ SDN, ESQ-FR, etc.
  • Cantilever pumps ESQ
    Cantilever pumps
    series K, 1K, 2K, KM, etc.
  • Two-way inlet pumps ESQ
    Two-way inlet pumps
    series D, 1D, 2D, etc.
  • Submersible pumps ESQ
    Submersible pumps
    series GNOM, ECV, CMC, CMF, etc.
  • Self-priming pumps ESQ
    Self-priming pumps
    ANS series , etc .
  • Gear pumps ESQ
    Gear pumps
    series Sh, NMSH, NMSHF, NMSHG, etc.
  • Industrial fans ESQ
    Industrial fans
    series ESQ VCC, ESQ VKP and others .
  • Frequency converters ESQ
    Frequency converters
    series ESQ-210, 760, 500 and others .
  • Soft start devices ESQ
    Soft start devices
    series ESQ-GS7, etc.
  • Worm gearboxes ESQ
    Worm gearboxes
    series NMRW, DRW, PCRW, etc.
  • Coaxially-cylindrical. gearboxes ESQ
    Coaxially-cylindrical. gearboxes
    series R, RC, PC, etc.
  • Conical gearboxes ESQ
    Conical gearboxes
    K series, etc.
  • Flat-cylindrical gearboxes ESQ
    Flat-cylindrical gearboxes
    F series, etc.
  • Variators ESQ
    Variators
    series UDL, UDT, etc.
  • Control stations and cabinets ESQ
    Control stations and cabinets
    series ESQ-CB, ESQ-CS, etc.
  • Switches in a cast housing ESQ
    Switches in a cast housing
    BA series, etc.
  • Modular automation ESQ
    Modular automation
    series VA, AVDT, VD, MMS, etc.
  • Operator touch panels ESQ
    Operator touch panels
    EC200, EU200, etc. series

About ESQ

ESQ is a brand of the company ELCOM (St. Petersburg), under which a wide range of industrial equipment is produced: frequency converters, gearboxes, electric motors, pumps, touch panels. ESQ's production facilities are located in Russia, China, Taiwan, and Italy.
  • reliability

    Products under the ESQ brand have exceptional technical characteristics that improve the quality of the product itself and ensure its reliability and durability.
  • quality

    At the enterprises that produce equipment under the ESQ brand, all conditions are created that allow us to offer high-quality products, according to international standards.
  • control

    The fundamental principle of the ESQ brand is the creation of high-demand products under the strict control of highly qualified specialists.

Information Board ESQ

Learn more about our products ESQ.
  • Price list for converters in the store ESQ
    Price list for converters
  • Pump catalog supplier ESQ
    Pump catalog
  • Converter catalog factory ESQ
    Converter catalog
  • Catalog of worm gearboxes supplier ESQ
    Catalog of worm gearboxes
  • The cylinder catalog. gearboxes factory ESQ
    The cylinder catalog. gearboxes
  • Catalog of modular automation from directory ESQ
    Catalog of modular automation
  • Questionnaire brands ESQ
    Questionnaire

NEW TECHNOLOGIES GROUP

For sales and support please contact